2014+ C7 Corvette Fore Innovations Fuel system (Dual Pump) 1,000rwhp+
2014+ C7 Corvette Fore Innovations Fuel system (Dual Pump) 1,000rwhp+
$2,674.50
Email us at Sales@4DHPClub.com if item says Sold Out
Outside of continental USA and International Shipping must contact us prior to ordering

Description:

The kit we have put together for you will handle upwards of 1000rwhp+ and includes the following Options:
  • Primary Fuel Pump - TI Auto F90000274
  • Secondary Fuel Pump - TI Auto F90000285
  • Electrical Upgrade - FC3 Staged Controller with 4 gauge wiring
  • Fuel Line - Starlite -8 Feed / Return
  • Filtration Media - Stainless Steel
  • System Options - 0-100 psi Fuel Pressure Gauge
  • System Options - Honeywell Pressure Switch for FC3
  • System Options - Flex Fuel Intercept fittings
  • Tools - 6mL tube of Loctite 567

Additional options added by 4DHPClub that are not normally included in this Fore Innovations package:

  • GM Fuel Pressure Sensor - NPT 1/8" Male Adapter
  • AN-8 to ORB-8 Swivel Billet Fitting with 1/8 NPT port
  • Required GM Fuel Pressure Sensor
  • Additional Billet 2-1 Y-Block with O-Ring Ports (all -8an fittings)
Please contact us directly to customize a different kit for you today Sales@4DHPClub.com

Click here to review all available options from Fore Innovations.

 

Description per Fore Innovations:

MAP or static referenced direct injection supply fuel system up to 1000 rwhp with dual fuel pumps (recommended to run one pump full time, then activate secondary pump under load). Supplies High Pressure Fuel Pump (HPFP) and auxillary port injection or wet nitrous. Includes in-tank supply system that retains OE transfer, fuel level senders, and EVAP functionality, upgraded feed and return lines, high capacity filtration and check valve, flow through t-block direct mounted on HPFP inlet tube, high capacity F2i regulator with provisions for static reference.

Fuel system becomes E85 capable by choosing F90000267, F90000274, F90000285 fuel pumps AND microglass SSD or stainless filtration.

Tuners are still working out the integration into the OE electrical system. Fore Innovations will provide detailed assistance on function of supplied components; however, we will not provide assistance with integration/tuning.

This fuel system will allow fuel to vaporize at the HPFP inlet and places the HPFP at risk for starting dry. Fore Innovations recommends an auxillary prime method be implemented to ensure liquid fuel (not vapor) is supplied to pump before engine start. We offer an optional prime button and time; however, we have found that some installers/owners prefer the prime function be assigned to the brake pedal or clutch pedal.
INCLUDES
  • 2014+ Corvette C7 Dual Pump Module
  • F2i Fuel Pressure Regulator (MAP reference or static)
  • 88mm Inline Fuel Filter
  • FCV Checkvalve
  • T-block to direct mount on HPFP
  • All fittings, hose, hardware required for typical fuel line plumbing
-35 feet of fuel line (your choice)
-10 billet compression style hose ends
-Qty 4, billet low profile 90 degree AN to o-ring fittings
-Qty 3, billlet straight AN to o-ring fittings
-Qty 1, 3/8 EFI female to ORB-10 male adapter
-Qty 1, AN union with C7 fuel pressure sensor adapter
-Qty 10, hose straps with stainless mounting screws

 

⚠ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.


All parts & products are sold for off-road use only. By purchasing this product you acknowledging this as fact, and maintain all responsibility in its use otherwise. 


Some of our products are made to order, due to this shipping of those products may take upwards of 6 weeks or so. Please contact us if you have any concerns, or if you need something expedited. Sales@4DHPClub.com