Injector Dynamics ID2000 Fuel Injectors
Injector Dynamics ID2000 Fuel Injectors

The ID2000 has set the standard for linearity and control in a large injector. Flowing in excess of 2000cc/min at 3 bar, the ID2000 will also provide a smooth stoichiometric idle on E85, and it will do all this while maintaining strict linearity up to 95% duty cycle at 9000rpm.

With a pressure capability of 9 bar this injector can flow as much as 3700cc/min with excellent low pulsewidth linearity, and has the broadest operating range of any injector on the market.

Basic Specifications

Nominal Flow Rate – 2225cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)

Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi)

Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Incompatible with MTBE/Nitro Methane/Nitro Propane.

Electrical Connector – Denso


$0.00
Email us at Sales@4DHPClub.com if item says Sold Out

Outside of continental USA and International Shipping must contact us prior to ordering.

 

⚠ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.


All parts & products are sold for off-road use only. By purchasing this product you acknowledging this as fact, and maintain all responsibility in its use otherwise. 


Some of our products are made to order, due to this shipping of those products may take upwards of 6 weeks or so. Please contact us if you have any concerns, or if you need something expedited. Sales@4DHPClub.com